KAT DRILLING
1 / 4
Anchoring is widely used in tunnel for pre-support, slope, coast, mine, water conservancy projects, Building foundation, roadbed reinforcement and geological faulty treatment such as landslip, crack, and sink age, it’s irreplaceable in narrow construction environment.
Comprised of a hollow threaded bar attached with a drill bit that performs drilling. The hollow bar allows air and water to freely pass through the bar during drilling to remove debris, after drilling at the required depth is completed, grout fills the hollow bar through the pressure for their requirement and completely covers the entire bolt.
The coupler can be used to join hollow bars and extend the bolt length, it means the anchor can be elongated with the couplers.
The plate and nut are installed according to their design requirement.
The drill bit would be selected at the choice of ground condition.
| Hollow Anchor Bar | |||||
|---|---|---|---|---|---|
| Size | Outer Dia. | Inner Dia. | Ultimate Load | Yield Load | Weight |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R32/20 | 32 | 20 | 210 | 160 | 2.83 |
| S-R32/17 | 32 | 17 | 280 | 230 | 3.5 |
| S-R32/15 | 32 | 15 | 360 | 280 | 4 |
| E-R32/21 | 32 | 21 | 210 | 160 | 2.6 |
| E-R32/19 | 32 | 19 | 280 | 230 | 2.95 |
| E-R32/17 | 32 | 17 | 360 | 280 | 3.5 |
| E-R32/15 | 32 | 15 | 405 | 320 | 4 |
| C-R32/21 | 32 | 21 | 250 | 190 | 2.6 |
| C-R32/20 | 32 | 20 | 280 | 230 | 2.83 |
| C-R32/17.5 | 32 | 17.5 | 360 | 280 | 3.4 |
| Coupler | ||||
|---|---|---|---|---|
| Size | Outer Dia. | Length | Weight | Note |
| (mm) | (mm) | (Kg/pc) | ||
| SSR32 | 42 | 145 | 0.79 | With sealing structure |
| 42 | 160 | 0.86 | ||
| 42 | 190 | 1 | ||
| SER32 | 42 | 145 | 0.77 | Without sealing structure |
| 42 | 160 | 0.84 | ||
| 42 | 190 | 1 | ||
| Drill Bit | |||
|---|---|---|---|
| Type | Outer Dia. | Weight | Application Range (Advice) |
| (mm) | (Kg) | ||
| Cast cross bit | R32/51 mm | 0.99 | Cast cross bit for sand and gravel |
| Steel cross bit | R32/51 mm | 0.88 | Hardened steel bit for loose to medium dense ground conditions |
| Steel cross bit | R32/76 mm | 2.87 | |
| Steel 3 cutter bit | R32/76 mm | 2.65 | |
| TC cross bit | R32/51 mm | 0.99 | TC insert bit for soft to medium rock formations |
| TC 3 cutter bit | R32/76 mm | 2.87 | |
| Steel arched bit | R32/51 mm | 0.99 | Hardened arched bit for optimized geometry for unconsolidated soil with small boulders |
| TC arched bit | R32/51 mm | 0.99 | TC arched bit for optimized geometry for soft to medium rock formations |
| Steel button bit | R32/51 mm | 1.32 | Hardened button bit for unconsolidated rock with boulders |
| TC button bit | R32/51 mm | 1.43 | TC insert button bit for medium rock formation |
| EX bit | R32/51 mm | 0.88 | Hardened cross cut drill bit, suitable for the majority of applications |
| EXX bit(alternative) | R32/51 mm | 1.1 | EXX is the hardest drill bit available, for strong rock and concrete. |
| Hex Nut | ||||
|---|---|---|---|---|
| Size | Key Size | Length | Weight | Hardness |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| SSR32 | 46 | 45 | 0.37 | 25-30 |
| 46 | 55 | 0.46 | ||
| 46 | 60 | 0.47 | ||
| Domed Plate | ||||
|---|---|---|---|---|
| Size | Dimensions | Thickness | Hole Dia. | Weight |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R32-E | 150×150 | 8 | 35 | 1.3 |
| 150×150 | 5 | 35 | 0.85 | |
| 150×150 | 6 | 35 | 1 | |
| 150×150 | 10 | 35 | 1.7 | |
| 175×175 | 8 | 35 | 1.9 | |
| 200×200 | 8 | 35 | 2.6 | |
| 200×200 | 10 | 35 | 3.52 | |
| 200×200 | 12 | 35 | 2.94 | |
| Anchor Plate | ||||
|---|---|---|---|---|
| Size | Dimensions | Thickness | Hole Dia. | Weight |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| SER32 | 95×95 | 25 | 35 | 1.6 |
| 120×120 | 30 | 35 | 3.2 | |
| 150×150 | 8 | 35 | 1.3 | |
| 200×200 | 10 | 35 | 3.06 | |
